Characteristics and Benefits

Integrity, cooperation, development, and win-win

为什么选择我们

The gasification efficiency is high, and with a high-efficiency gas-fired boiler, higher heat energy utilization efficiency can be obtained.

Uninterrupted operation throughout the day (also convenient for temporary shutdown of the furnace for a few hours to a few days, and then start operation), stable operation, to ensure the reliability and continuity of customer production and heat use.

The gasification furnace body is fully sealed, running under slight positive pressure, multi-level explosion-proof, safe and reliable.

Biomass fuel gas contains almost no sulfur. After clean combustion, the content of nitrogen oxides and fly ash is extremely low. Low-nitrogen combustion control technology is used in the combustion to achieve emission standards.

A small amount of tar liquid separated from the gas in the gasifier is sent back to the gasifier for secondary pyrolysis and gasification, achieving zero pollution emissions and not blocking the gas pipeline.

The gasification furnace can be designed according to customer needs, through reasonable design of the gasification furnace and system equipment, to achieve green, circular, high-efficiency, high-value and comprehensive utilization of biomass.

Biomass fuel gas contains almost no sulfur. After clean combustion, the content of nitrogen oxides and fly ash is extremely low. Low-nitrogen combustion control technology is used in the combustion to achieve emission standards.

The construction period is short, the heating cost is low, and the biomass gasification heating technology makes the cost of steam usually lower than that of natural gas, which is more economical.

环保效益

In the process of pyrolysis and gasification of biomass, the equipment pipeline is fully enclosed and there is no gas leakage; the bottom of the equipment discharges carbon slag, which can be recycled; the flue gas generated after the combustion of biomass gas reaches the latest national and local gas boiler emissions standard.


The emission of biomass gas after combustion meets the emission standard of gas boiler

Unit:mg/m3

project

Soot

SO2

NO2

Remarks

Coal-fired boiler

50

300

300

National standard

Oil boiler

30

200

250

National standard

Gas boiler

20

50

200

National standard

Gas boiler

20

50

150

Guangdong Standard

Biomass Gas boiler furnace monitoring report

<15

<30

<100

Standards compliant

经济效益

产品特点
  • 耐用

    Durable

  • 高效

    Operation Management

  • 经济

    Economic

  • 环保

    Environmental Protection

  • 宽泛

    Wide Range

  • Independent research and development and use of a new type of air supply device, local high temperature can still ensure long-term use.

    General-purpose air supply grate purchased on the market (only used for 21 days)

    Patented integrated air supply system (continuous use more than 30000h)

  • Independently design the gas purification device to make the biogas more pure, use a special burner, burn more fully, and maintain the high efficiency of the boiler thermal efficiency.

  • Not only stable heating, but also good quality charcoal can be obtained. The biomass gasification process mainly involves the reaction of lignin, cellulose and hemicellulose to form usable fuel gas, which is supplied to the boiler, and at the same time, no less than 15% of charcoal can be obtained.


  • More environmentally friendly-low nitrogen combustion combined with recycling system


    1. Low-nitrogen combustion, flue gas emissions meet the national emission standards for gas-fired boilers.


    2. Design equipment for utilization of auxiliary products such as wood tar and wood vinegar. By-products will be used through the design of internal circulation to prevent pollutant discharge.









    未标题-2.jpg

    Design equipment for utilization of auxiliary products such as wood tar and wood vinegar. By-products will be consumed and used through internal circulation to reduce secondary pollutant emissions.


    Biomass gasification is accompanied by the production of by-products. Wood tar and wood vinegar are the main components of the by-products. How to use such by-products with high calorific value is the key design of biomass gasifier technology.


    This part of our company's design mainly uses by-products to be reused in the gasifier, and the heat generated is also used in the final furnace, the calorific value can be fully utilized, and the pyrolysis efficiency is improved.


  • Equipped with material conveying equipment with large conveying capacity, and designed to use a high-strength slag breaking system, the use of raw materials is more extensive, and larger moisture and irregular wood materials can be used.


    Broader-Configure "Steel Stomach" system


    Huanyu gasifier has strong applicability. Generally, biomass fuel with moisture content ≤40% and length ≤30cm can be used.